aion L5 Handmatig - Pagina 3

Blader online of download pdf Handmatig voor {categorie_naam} aion L5. aion L5 20 pagina's.

USAGE

The L5 Preamp has the following controls:

Channel 1

• Bright (toggle switch) adds a treble-bleed capacitor to the volume control, which preserves some of

the treble at lower volume levels to keep it from getting dull.

• Treble, Mid and Bass form a standard Fender-style 3-band passive EQ.

• Volume controls the amount of gain in the first stage, before the EQ and drive section.

Channel 2

• Bright (toggle switch) adds a treble-bleed capacitor to the volume control, which preserves some of

the treble at lower volume levels to keep it from getting dull.

• Volume controls the amount of gain in the first stage, before the EQ and drive section.

• Treble and Bass form a standard 2-band Baxandall control. Each band is flat at the 12:00 position,

and can either cut (CCW) or boost (CW).

• Mid boosts (CCW) or cuts (CW) the midrange frequency selected by the Frequency control.

• Frequency selects the frequency that will be boosted or cut by the Mid control, from 100 Hz at full

CCW to 6.4kHz at full CW.

Both channels

• Multifilter blends a six-band fixed EQ boost, adding harmonics to the instrument signal.

• Multifilter Channel (toggle) moves the multifilter between channel 1 or channel 2.

• Master sets the output volume after the drive section of the preamp.

• Limit sets the threshold of the compressor at the end of the circuit.

• Comp (toggle) engages or disengages the compressor.

L5 PREAMP