Blue baby bottle SL Gebruikershandleiding - Pagina 4
Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Blue baby bottle SL. Blue baby bottle SL 10 pagina's. Large-diaphragm studio condenser microphone
Pagina afdrukken
The Baby Bottle SL requires +48V phantom power and works great with audio interfaces, mixers and most mic
preamps. For best performance and to avoid damage to the microphone's audio components, we recommend
the following procedure:
Set mic preamp gain to its nominal position ("off").
Mute the input channel in your DAW or mixing console.
Connect the female end of your balanced XLR microphone cable to the Baby Bottle SL's output jack.
Connect the male end to your balanced console input or balanced mic preamp input.
Switch on phantom power.
Un-mute all previously muted signal paths and adjust mic preamp gain as necessary.
The Baby Bottle SL is a cardioid mic, and is designed to reject off-axis sound arriving at the back of the
capsule. Once the Baby Bottle SL is on the mic stand and powered up, make sure that the active, on-axis
side of the capsule (the side aligned with and directly above the Blue logo) is facing the desired sound source.
Engage the -20dB pad if you're recording a loud sound source with sharp transients like a snare drum, toms,
electric guitar amp, or a powerful vocalist. Unless you're recording a very low frequency instrument, like a kick
drum or a bass amp, it's typically good practice to engage the 100Hz high-pass filter to make sure that very
low frequency and subsonic rumble or peaks don't compromise the headroom of your recordings.
4