Blue Angel BSPF Gebruiksaanwijzing en onderdelenhandleiding - Pagina 4

Blader online of download pdf Gebruiksaanwijzing en onderdelenhandleiding voor {categorie_naam} Blue Angel BSPF. Blue Angel BSPF 4 pagina's. Submersible sump pump

Pagina afdrukken

Operating Instructions and Parts Manual

Troubleshooting Chart

Symptom

Pump will not start or

run

Pump starts and stops

too often

Pump will not shut off

or thermal protector

turns off

Pump operates but

delivers little or no

water

Limited Warranty

For (One year on Models BSPF33, BSPF50, and BSC333HH) (Three years on Models BCS33, BCS50, and BCS50-2) (Five years

on Models SSBCSF33-2, SSBCS33, SSBCSF50-2, SSBCS50) from the date of purchase, Blue Angel™ will repair or replace, at its

option, for the original purchaser any part or parts of its Sump Pumps or Water Pumps ("Product") found upon examination

by Blue Angel™ to be defective in materials or workmanship. Please call Blue Angel (1-888-636-6628) for instructions or

see your dealer. Be prepared to provide the model number when exercising this warranty. All transportation charges on

Products or parts submitted for repair or replacement must be paid by purchaser.

This Limited Warranty does not cover Products which have been damaged as a result of accident, abuse, misuse, neglect,

improper installation, improper maintenance, or failure to operate in accordance with Blue Angel's™ written instructions.

THERE IS NO OTHER EXPRESS WARRANTY. IMPLIED WARRANTIES, INCLUDING THOSE OF MERCHANTABILITY AND

FITNESS FOR A PARTICULAR PURPOSE, ARE LIMITED TO (ONE YEAR ON MODELS BSPF33, BSPF50, AND BSC333HH)

(THREE YEARS ON MODELS BCS33, BCS50, AND BCS50-2) (FIVE YEARS ON MODELS SSBCSF33-2, SSBCS33,

SSBCSF50-2, SSBCS50) FROM THE DATE OF PURCHASE. THIS IS THE EXCLUSIVE REMEDY AND ANY LIABILITY FOR

ANY AND ALL INDIRECT OR CONSEQUENTIAL DAMAGES OR EXPENSES WHATSOEVER IS EXCLUDED.

Some states do not allow limitations on how long an implied warranty lasts, or do not allow the exclusions or limitations

of incidental or consequential damages, so the above limitations might not apply to you. This limited warranty gives you

specific legal rights, and you may also have other legal rights which vary from state to state.

In no event, whether as a result of breach of contract warranty, tort (including negligence) or otherwise, shall Blue Angel™

or its suppliers be liable for any special, consequential, incidental or penal damages including, but not limited to loss of

profit or revenues, loss of use of the products or any associated equipment, damage to associated equipment, cost of

capital, cost of substitute products, facilities, services or replacement power, downtime costs, or claims of buyer's customers

for such damages.

You MUST retain your purchase receipt along with this form. In the event you need to exercise a warranty claim, you MUST

send a copy of the purchase receipt along with the material or correspondence. Please call Blue Angel™ (1-888-636-6628)

for return authorization and instructions.

DO NOT MAIL THIS FORM TO BLUE ANGEL. Use this form only to maintain your records.

MODEL NO. ____________________

ATTACH YOUR RECEIPT HERE

www.blueangelpumps.com

Possible Cause(s)

1. Blown fuse, tripped breaker

2. Low line voltage

3. Defective motor

4. Defective float switch

5. Impeller bound

6. Float obstructed

7. GFCI tripped

1. Back-flow of water from piping

2. Faulty float switch

1. Float obstructed

2. Obstacle in piping

3. Defective float switch

1. Low line voltage

2. Clogged inlet

3. Plugged impeller

4. Obstacle in piping

5. Check valve installed backwards

6. Too many appliances on circuit

SERIAL NO. ____________________

BCS, BSPF, and SSBCS Series

Corrective Action

1. If blown, replace with proper sized fuse or reset breaker.

2. If voltage is under 108 volts, check wiring size.

- DO NOT USE AN EXTENSION CORD

3. Replace pump

4. Replace float switch

5. If impeller will not turn, remove housing and remove

blockage

6. Make sure float moves freely up and down float rod

7. Reset GFCI Circuit. If GFCI continues to trip, replace pump.

1. Install or replace check valve

2. Replace float switch

1. Make sure float move freely up and down

2. Remove pump and clean pump, check valve and piping

3. Replace float switch

1. If voltage is under 108 volts, check wiring size

- DO NOT USE AN EXTENSION CORD

2. Clean inlet screen

3. Clean out impeller

4. Remove pump and clean pump, check valve and piping

5. Reverse position of check valve

6. Install pump on dedicated circuit.

IMPORTANT: Do not use an extension cord to power pump

INSTALLATION DATE ____________________