DNF Controls 4000CL-L Gebruikershandleiding - Pagina 7

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} DNF Controls 4000CL-L. DNF Controls 4000CL-L 19 pagina's. 400 clip fast access system using louth protocol

Pagina afdrukken
4.

VIDEO SERVER SETUP

a.
Select LOUTH VDCP communications protocol on the VIDEO SERVER to be
controlled.
b.
If required, assign a serial port on the VIDEO SERVER through which the ST300 will
control it.
NOTE: In LOUTH mode, the VIDEO SERVER may only allow Full Record. INSERT
and ASSEMBLE record modes may be disabled.
Setup is complete.
5.

LOAD A CLIP

a.
Select a VTR by pressing VTR[1], VTR[2], VTR[3], or VTR[4].
b.
Press [CLIP LIST] to view the list of CLIP IDs that are resident on the Video Server.
The CLIP LIST indicator will turn on.
c.
Turn the Wheel to view the existing CLIP IDs on the video server.
Turn the Wheel clockwise to scroll forward, or counter-clockwise to scroll backward,
through the list of available CLIPs. Backward scrolling is limited to the last 10 CLIP IDs
viewed.
OR
Manually enter a CLIP ID using the ST300 numeric keypad, or PC keyboard (if KBIO
option).
d.
Press [LOAD] to load the selected CLIP ID for playout.
e.
Repeat steps a - d to load clips on desired VTRs.
f.
Set the GANG mode, if required.
6.
VIEW THE CLIP ID OF THE CURRENTLY LOADED
CLIP
Press [SHIFT] + [LOAD]. The bottom line will show the name of the loaded clip.
7
4000CL-L, Vs.2.1, 400 Clip Fast Access System, Louth Protocol