DNF Controls 4000CL-L-T Gebruikershandleiding - Pagina 9

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} DNF Controls 4000CL-L-T. DNF Controls 4000CL-L-T 19 pagina's. 400 clip fast access system using louth protocol

Pagina afdrukken

Advanced Features . . .

10. CREATE A CLIP

NOTE: New clips can be created ONLY if the INPUT Port is selected.
a.

SET THE RECORD DURATION

1)
2)
3)
4)
NOTE: Set Factory Defaults (in the SETUP MENU) to set the record duration to 1 hour.
b.

CREATE A NEW NAME

1)
2)
3)
4)
9
4000CL-L, Vs.2.1, 400 Clip Fast Access System, Louth Protocol
Press [SHIFT] + [RECORD].
The display shows current record duration. The second line of the display
shows "Enter Record Length" prompt.
Enter the desired record length using the numeric keypad.
Press [ENTER] to save the new record length and exit
OR
Press [ESC] to exit without saving.
Press [CLIP LIST]. The CLIP LIST indicator turns on. The display will show
"CREATE NEW CLIP."
Press [LOAD]. The display will show the default CLIP ID.
Press [LOAD] to accept the default CLIP ID.
OR
Use [NEXT CUE], [LAST CUE] and Wheel to create a CLIP ID. Use the
[NEXT CUE] and [LAST CUE] keys to position the cursor. Turn the Wheel to
select the desired letter.
OR
Create an ID using the numeric keypad, with a maximum of eight characters.
Press [ENTER].
Press [LOAD] to create the selected CLIP ID. If the selected CLIP ID already
exists, a warning message will be displayed. To load the existing clip, press
[ENTER]. Press [ESC] to exit without loading the existing clip.