Blue Bamboo P200 Snelle installatiehandleiding

Blader online of download pdf Snelle installatiehandleiding voor {categorie_naam} Blue Bamboo P200. Blue Bamboo P200 2 pagina's.

Pagina afdrukken

Load Paper

1. Open the lid.

2. Install paper roll with paper pointing up.

3. Pull out a small amount of paper, close lid.

Packing List

Printer

Paper

1A Power Adapter

Battery

(3A optional)

Contact your distributor for replacement parts

Install Battery

1. Remove the battery cover.

2. Plug in the battery cable into the connector.

3. Install the battery into the slot and install the

battery cover.

Battery

Connector

Status LED

Paper Cutter

MSR

Power Jack

Serial Port

USB Port

Cancel Key

Clear Key

Navigation

Enter Key

Key

Menu Key

Numeric Keypad

Feed Button

Power & Charging

1. Insert the DC plug of power adapter* into

the power jack of printer.

2. Plug power adaptor into AC power outlet.

Power

Jack

*Optional 3Amp power supply required when running without battery.

Front

Power

Button

Install SAM Card

1. Remove the battery cover and battery.

2. Open the card holder and insert the SAM card

with the electronic chip facing down and the

cut-out corner on top.

3. Close the card holder and lock it into

place.

4. Install the battery and the battery cover.

Back

Battery

Cover

SAM Slot