3M Multimedia Projector X80 Veiligheidshandboek - Pagina 10
Blader online of download pdf Veiligheidshandboek voor {categorie_naam} 3M Multimedia Projector X80. 3M Multimedia Projector X80 13 pagina's. 3m x70: quick start
Ook voor 3M Multimedia Projector X80: Brochure & specificaties (4 pagina's), Specificaties (2 pagina's), Handleiding productveiligheid (6 pagina's)
Pagina afdrukken
3. Remove lamp module: Carefully slide the lamp module out (4) using steady pressure.
4. Insert lamp module: Carefully insert (4) the new lamp module. Ensure that it is fully seated.
Tighten the lamp module retaining screws (3) to secure the lamp module in place.
X70 : Optional Lamp: 78-6969-9718-4
X80 : Optional Lamp: 78-6969-9719-2 (Contact 3M customer Service.)
Interlocking the 2 tabs (5) of the lamp door to the projector, put the lamp door on the projector.
Then push the point of the lamp door to fix it, as shown in the figure. Make sure that the lamp
cover doesn't come up.
Reset the lamp operation hours. See "Reset Lamp Hours" for details.
(5)
(1)
10
√
(2)
3M™ Multimedia Projector X70/X80 Product Safety Guide
Note
(3)
(4)
© 3M 2004