Blue Clean AR390SS Gebruiksaanwijzing - Pagina 13

Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} Blue Clean AR390SS. Blue Clean AR390SS 20 pagina's.

Perating

nStrUctionS

*!Turn on the water supply at the faucet.!* (Fig. 18)

Powering Up

•

Make sure the "ON/OFF" switch is in the "OFF" position. The power switch has international

symbols for 'on' and 'off': On (|) Off (O), (Fig. 19).

•

Unwind the power cord completely and plug the GFCI into a grounded 120 volt outlet. Press the

'reset' button on the GFCI box (Fig. 20). The indicator window should show a red color. This must

be done each time the unit is plugged in.

•

Release the safety lock button on the spray gun by pressing the safety lock in the back under

the handle (Fig. 21). While pointing the spray gun in a safe direction, squeeze the trigger on the

spray gun until there is a steady stream of water, letting the water and air out of the hose. Press

the button in front to lock the trigger.

•

Turn the power switch to the 'ON' (|) position. The unit will turn on for 1 - 2 seconds and shut off,

this is a normal function of the (TSS) auto start feature. Squeeze the spray gun trigger to begin

pressure washing.

•

Squeezing rapidly will cause the (TSS) feature to miss an on/off cycle that may prevent from

turning on while squeezing trigger after rapid squeezing. Use slow deliberate trigger pulls to

avoid such symptoms.

OFF/0

Fig. 18

Trigger Lock

Fig. 20

OFF/0

ON/I

Trigger Unlock

Fig. 19

Fig. 21