Do Beauty Starter Lizzy ND602 Producthandleiding - Pagina 4

Blader online of download pdf Producthandleiding voor {categorie_naam} Do Beauty Starter Lizzy ND602. Do Beauty Starter Lizzy ND602 4 pagina's. Electric nail drill

Pagina afdrukken

PRECAUTIONS

Keep the area around hand-piece free from dust and grindings.

Wipe away dust from around the hand piece. You can wipe over with isopropyl alcohol. Avoid

liquids from penetrating into internal components.

Do not apply oil to any part of the device or clean with water.

Do not apply strong air pressure to clean the hand-piece.

SPECIFICATIONS

Material: Aluminium

Input Voltage: 100V-120V,60Hz, 220V-240V,50Hz

Power: 20W

Output Voltage: DC 12V, 1 A

Speed: 0-30,000 RPM

The actual max speed will be less than 30,000RPM.

Diameter of bits should be 2.2 -2.4mm otherwise it cannot be seized.

TROUBLESHOOTING

Issues

Motor fails to run

Motor stop suddenly in use

[safety protection system functioned]

Motor fails to run when foot

pedal is used

Cause

Loose connection motor plug

with jack in control unit

Defect in motor cord

Trouble in motor

Overloaded or chuck is opened

during operation

H/F selector is at "H"

Foot pedal fails to function

Defect in foot pedal cord

Loose connection foot pedal

plug with jack in control unit

Switch off

Remedy

Correctly plug the motor cord

Replace motor cord

Check motor and repair if the motor is troubled

Check the chuck and close the chuck if opened

Set it at "F"

Check and replace foot pedal

Check foot pedal plug and connection

Check power switch "ON"