DO HEATING Austen Instructies voor bevestiging - Pagina 4

Blader online of download pdf Instructies voor bevestiging voor {categorie_naam} DO HEATING Austen. DO HEATING Austen 8 pagina's. Towel rail

User Manual

CAUTION: To avoid overheating, do not cover the heating appliance.

CAUTION: Hot surface.

THESE INSTRUCTIONS SHOULD BE READ CAREFULLY, AND RETAINED FOR FUTURE REFERENCE.

DO NOT CONNECT THE RADIATOR TO NETWORK BEFORE HAVING READ AND UNDERSTAND THE

FOLLOWING INSTRUCTIONS.

Radiator must be installed only by expert technicians and installation must be compliant with all applicable

rules, and national safety regulations and laws in force in the country where the product is installed.

CAUTION: Some parts of this product can become very hot and cause burns. Particular attention has to be

given where children and aﬄicted people are present.

During operation the radiator surface will get hot, however momentary contact with any part of it should not

cause any injury.

In case the radiator is used in a public place, a warning should be placed next to it advising the hot surface.

CARE AND MAINTENANCE

Radiators are designed to be used under below circumtances;

•

Radiators are heavy items and should be securely fastened to the wall. In all cases, it is strongly

recommended that a suitably qualified professional carries out the installation. Specific care should be

taken into consideration, including the fixing method used to secure the radiator to the wall, the type and the

condition of the wall itself, and any additional potential forces or weights, prior to finalising installation.

•

The wall plugs supplied with your radiator may not be suitable for your wall type. The appropriate wall plugs

should be choosed by your installer.

•

The product is reliable for maximum working pressure of 4 bar. DO NOT use the product above these

maximum pressure limits.

•

Before installing the radiator, heating system should be properly flushed and filled in order to remove debris,

sludge and clean solid particles and chemical residues, which may cause corrosion and damage the system.

•

When connecting pipes of various materials, their diﬀerence in electrode potential may cause galvanic

corrosion and serious damage of pipes, valves and other equipment in the system. To avoid galvanic

corrosion, it is highly recommended to use the same materials, or materials with similar electric potential,

throughout loop.

•

When the air is trapped within the radiator, it may cause ineﬃcient warming. Purge plug should be loosened

with a screwdriver to release the air. When the water starts to come out, the purge plug must be retightened.