FlavorChef EP0030K Gebruikershandleiding - Pagina 16

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} FlavorChef EP0030K. FlavorChef EP0030K 16 pagina's. Express kitchen system

Pagina afdrukken
5. Place the Circular Disc on top of the Spindle (see f. below).
6. Connect the Lid to the Master Jar (see g. below).
7.
Place the food to be processed into the Chute and using the Pusher move the food down the Chute towards
the Circular Disc.
!
USE ONLY THE PUSHER TOOL TO MOVE FOOD DOWN THE CHUTE. NEVER USE YOUR FINGERS
WARNING
FOR THIS PURPOSE AS SERIOUS PERSONAL INJURY CAN OCCUR.
NOTE: Use gentle force when pressing down on the food Pusher. Excessive force could cause damage to the the
Circular Disc.
8. Turn the unit on.
9. Recommended setting for slicing and julienne: 1
10. Recommended setting for grating: 2
NOTE: The total operating time should not be longer than 2 minutes.
f
Suggested Use
• Slicing (Medium - 3mm/0.12" and Thin* - 1.5mm/0.06"):
Vegetables and Potatoes
• Grating (Coarse): Cheese
• Grating (fine*): Hard cheese, chocolate
• Julienne: Vegetables
*NOTE: The Fine Grating and the Thin Slicing (1.5mm/0.06") Blades are Optional Accessories that do not come
with the standard unit.
After Use
1.
To remove the blade insert from the Circular Disc, turn the Circular Disc over and using both thumbs, press
down on the edge of the blade insert (see a. below).
2. The blade insert should now be release from the Circular Disc (see b. below).
!
WARNING
THE GRATING, JULIENNE AND SLICING BLADES ARE VERY SHARP, USE CAUTION WHEN HANDLING.
a
b
15
g
Chopping and Grating
(Red)
Tip
For best results, chop first and then grate.
Master Jar
Multi-Base
Spindle (Black)
!
Make sure the unit is turned off and unplugged before use. You can plug it in only once all the
IMPORTANT
parts are assembled.
1.
Connect the Multi-Base to the Master Jar (see "Connecting/Disconnecting Bases").
2.
Connect the Master Jar (with Multi-Base) to the Motor Housing (see "Connecting the Master Jar to the Motor Housing").
3.
Connect the Spindle to the Multi-Base (see a. below).
4. Place the Chopping Blade onto of Spindle (see b. below).
!
WARNING
THE CHOPPING BLADE IS VERY SHARP, USE EXTREME CAUTION WHEN HANDLING.
a
5. Place the food to be chopped inside the Master Jar.
6.
Connect the Lid to the Master Jar.
7.
Turn the unit on. Recommended setting: 1 or "P"
8. To add grated cheese to the chopped ingredients, connect either the fine* or coarse Grating Blade to the Circular Disc.
Circular Disc with
Chopping Blade
Motor Housing
Grating Blade
b
16