Fleck 5600SXT Programmeren

Blader online of download pdf Programmeren voor {categorie_naam} Fleck 5600SXT. Fleck 5600SXT 3 pagina's.
Ook voor Fleck 5600SXT: Handleiding voor installatie-instructies (19 pagina's), Installatiehandleiding (14 pagina's)

Pagina afdrukken
Fleck 5600SXT Programmeren
www.h2ofilters.ca 
 
 
FLECK 5600 SXT WATER
SOFTENER PROGRAMMING
TO ENTER INTO MASTER PROGRAMMING: Press the arrow up button and set the time to 12:01
P.M., then press the extra cycle button once. Now press the up and down buttons together for
approximately 8 seconds until the display changes to the programming mode.
The display should now be:
Press the Extra Cycle button to advance to the next step.
Next display should be:
Press the Extra Cycle button to advance to the next step.
Next display should be:
Press the Extra Cycle button to advance to the next step.
Next display should be:
Press the Extra Cycle button to advance to the next step.