DockCraft DS300 Montage-, installatie-, installatie- en bedieningsinstructies - Pagina 4

Blader online of download pdf Montage-, installatie-, installatie- en bedieningsinstructies voor {categorie_naam} DockCraft DS300. DockCraft DS300 12 pagina's.

Pagina afdrukken

Attach Cradle Handle :

1 - Position Handle over Cradle.

2 - Slide the Handle over extension on Cradle.

3 - Depress Snap Button on Cradle.

4 - Seat Handle until Snap Button pops through the Handle hole.

5 - Repeat process for the other side of the Cradle.

Steps 1 – 4

Lifting

Straps

Dockside Rack

Notes - Dockside Rack – Short Legs on the outside

Waterside Rack – Shorter Legs on the inside

Insert Clevis Pins to set height of rack from water

If the Water Level is 10 to 25 inches below your Dock Decking -

6 - Insert Clevis Pin through Hole #2 in Pivot Lateral such that the head is between the Pivot Lateral and Cradle,

attach retaining ring through the hole in the end of the clevis pin.

7 – If the Water Level is 25 inches or greater from the Dock Decking –

Insert Clevis Pin through Hole #4 in Pivot Lateral such that the head is between the Pivot Lateral and Cradle,

attach retaining ring through the hole in the end of the clevis pin.

Dockside Rack

Hole 4

Hole 2

Circular

Retaining

Ring

Assembly Instruction

Handle

Lifting

Pivot

Straps

Lateral

Cradle

Waterside Rack

Clevis Pin

Head

Snap Button

Cam Buckle