Fleet Complete Vision 2.0 Installatiehandleiding - Pagina 5

Blader online of download pdf Installatiehandleiding voor {categorie_naam} Fleet Complete Vision 2.0. Fleet Complete Vision 2.0 14 pagina's.
Ook voor Fleet Complete Vision 2.0: Snelle referentiekaart (3 pagina's)

Pagina afdrukken

Before You Start

• Before mounting your Vision 2.0 Camera, ensure that you have wiped the windshield area with a dry cloth. If you

notice dirt or particles stuck to your windshield, wipe the windshield area clean with a damp cloth and then wipe it

again with a dry cloth. A dry and clean windshield surface area ensures a secure mount via the adhesive mount strips

located underneath your mount arm.

• Peel the red tape from your adhesive mount strips ONLY when you are ready to mount your camera. DO NOT leave

the adhesive open to debris once the red tape is peeled off (this could create a bubble effect in your adhesive mount

and lessen the duration of a long-term mount).

• Remove the plastic cover from the cabin view and road facing lens.

INSTALLATION GUIDE