FLENDER FASTEX IN110 Montage- en bedieningshandleiding - Pagina 9

Blader online of download pdf Montage- en bedieningshandleiding voor {categorie_naam} FLENDER FASTEX IN110. FLENDER FASTEX IN110 18 pagina's.

4 Assembly

Danger due to bursting of the assembly group

If not used as intended, the assembly can burst. There is a risk of fatal injury from flying

fragments. Bursting of the assembly can lead to an explosion in potentially explosive

atmospheres.

•

Note

Information about the assembly of the clamping element

•

Recommended assigned fits

In the following table you will find the permissible fits of the clamping element and the shaft.

Table 4-1

Shaft tolerance

FASTEX IN110 Clamping element 3908de

Compact assembly and operating instructions 05/2022

DANGER

Use the clamping element as intended

Only use undamaged components for the assembly of the clamping element.

Follow the assembly sequence.

Please ensure that there is sufficient space at the assembly location and that the

location is tidy and clean in order to be able to assemble and maintain the clamping

element without any risk.

If a dimension drawing has been created for the clamping element, please observe the

information it contains as a matter of priority

Recommended assigned fits

component

D1 ≤ 38 mm

Bore tolerance

Figure 4-1

tolerance

D1 > 38 mm

D2 H7

D2 H8

Fit assignment

surface quality

Ra ≤ 1,0 µm