Flepcher FLP-MIA910 Snelstarthandleiding - Pagina 5

Blader online of download pdf Snelstarthandleiding voor {categorie_naam} Flepcher FLP-MIA910. Flepcher FLP-MIA910 7 pagina's. 10 watts rms

Connections & Controls:

1. DC Power Input

100~240V AC, 50~60Hz input range.

2. Power ON/OFF Switch – Turns amplifier power on or off. When on,

the blue LED by the input connections will illuminate.

3. Speaker Output Connection – Detachable Phoenix style connector

may be removed from the amplifier for easy access & wiring. Screw

type terminals will accept up to 14AWG wire. Also, as this is a floating

output, no speaker connections may be tied to chassis or earth

ground. Minimum speaker impedance 4Ω

4. Power LED – Indicates presence of input voltage when Power Switch

is in the On position.

5. Audio Input Connection – Accepts standard line level, unbalanced

signals from conventional consumer devices such as CD/DVD players,

television monitors, tape decks and tuners. Note: The input signal is

summed to mono via an internal resistive network.

6. Level Controls - Sets output level for the amplifier. When the

amplifier is operating in bridged mono mode, only the right control is

used. Care should be taken to avoid running the amplifier or speaker

system into distortion as this could cause damage to one or both.