Dodge 3500 Ram Chassis Cab vehicle Bedienings- en installatiehandleiding - Pagina 7
Blader online of download pdf Bedienings- en installatiehandleiding voor {categorie_naam} Dodge 3500 Ram Chassis Cab vehicle. Dodge 3500 Ram Chassis Cab vehicle 17 pagina's. 2011 chassis cab
Pagina afdrukkenPTO Operation & Installation Guide
Stationary PTO/Remote PTO Calibrations:
Maximum Engine Torque
The engine torque will be limited to this value when PTO or Remote PTO is Active.
Maximum Vehicle Speed
The maximum vehicle speed allowed before deactivating PTO. Range 1-25 MPH.
Minimum Engine Speed
Defines the lower limit engine speed can be adjusted to when PTO/Remote PTO is
active. The engine speed can be reached by either Ramp down or Bump down.
Maximum Engine Speed
Defines the upper limit engine speed can be adjusted to when PTO/Remote PTO is
active. The engine speed can be reached by either Ramp up or Bump Up.
Engine Speed Ramp Rate
The ERPM/second change rate allowed during a ramp up or ramp down.
Idle Up Set Speed
Initial engine speed when Idle up is activated.
Number of Remote PTO Speed Settings
Total number of engine speed selections available to Remote PTO feature. Range 1-5.
Remote PTO Speed Setting 1, 2, 3, 4 and 5
Individual engine speed settings available to Remote PTO feature.
.
Electrical Connection to the Vehicle
The vehicle wiring provides an easy access point to connect your PTO. There are two
locations provided for ease of interface 1) is a 8 way connector located on the left side of
the vehicle near the bell housing of the transmission and 2) is a connector located in the
cab of the vehicle. These connectors contain the circuits required to integrate the PTO to
the vehicles electrical system. The following chart is provided to assist in correctly
interfacing the PTO with the vehicle:
2011 Chassis Cab
01/22/2010
-
-
+
+
ALL
ALL
IN
IN
OUT
OUT