Clinton 3013 Montage-instructies - Pagina 3
Blader online of download pdf Montage-instructies voor {categorie_naam} Clinton 3013. Clinton 3013 4 pagina's. Treatment tables with adjustable backrest or non-adjustable top
Pagina afdrukken
FOR MODELS WITH ADJUSTABLE BACKREST
Place the black backrest channel on top of the
5
frame tabs with the channel cutouts close to
the head end. Secure using (2)
head screw and
/
" locknut at each end.
5
16
FOR MODELS WITH ADJUSTABLE BACKREST
6
Loosely fasten the adjustable backrest hinge to
the frame's cross member using (4)
1 ½" hex bolts, two
and
/
" locknuts. Note: Hinge flap goes on the black
5
16
channel side.
FOR SAFETY PURPOSES, TAKE TIME TO CHECK ALL SCREWS, BOLTS AND NUTS TO INSURE THAT
THEY ARE SECURELY TIGHTENED AND THAT THE TABLE HAS BEEN PROPERLY ASSEMBLED
PROCEED TO STEPS 10, 11 & 12 ON BACK COVER FOR MODELS 3020, 3030 & 3013
/
-20 x 1" truss
1
4
/
-20 x
1
4
/
" washers (one each side)
5
16
ACCORDING TO THESE INSTRUCTIONS.
FOR MODELS WITH ADJUSTABLE BACKREST
Mount the foot end of the top by placing the
7
(4)
/
-20 x 2
1
5
4
screws through the frame sides
and the (2)
/
-20 x 1" truss head screws and
1
4
/
" washers at the end mounting points and
5
16
tightly securing the top. Fully tighten hinge
hardware from Step 6.
FOR MODELS WITH ADJUSTABLE BACKREST
Secure all screws in the frame
8
FOR MODELS WITH ADJUSTABLE BACKREST
Secure the middle brace to the top
9
/
" truss head
8