CANNA UNION VP-EM-001 Gebruikershandleiding - Pagina 3
Blader online of download pdf Gebruikershandleiding voor {categorie_naam} CANNA UNION VP-EM-001. CANNA UNION VP-EM-001 5 pagina's. Vape pen starter kit
Pagina afdrukken
How does the Vape Pen work?
Get to know the vape pen with the following terms:
●
Battery: The battery powers the device and is also the longest part of the pen.
●
Heating chamber/atomizer: The heating chamber is the area where your oil gets heated and
vaporized.
●
Mouthpiece: The mouthpiece is where you draw the vapor to smoke it.
●
Charger: The charger is a separate piece from the pen that is usually attached to a micro USB
and is used for charging your vape battery.
The vape pen works by powering a heating chamber that heats the oil to produce a vapor, which users
then inhale through the mouthpiece.
How to Turn on/off The Vape Pen?
●
Press the button rapidly 5 times.
●
Notice the LED light indicator on the button flashing.
●
The battery is now activated, holding the button down while inhaling is needed.
●
Rapidly click the button 5 times to turn the battery off.
How to Load The Vape Pen?
To load the vape pen with pre-filled oil cartridges make sure to unscrew the empty cartridge counter-
clockwise and replace it with a new one by screwing it on clockwise until it stops. Be careful not to
overtighten your cartridge, as this can damage it.
Once loaded, vape pen is ready to use. Our vape pens come with activation buttons. These offer control
over the temperature of the vapor. The vape pen require five clicks to turn them on, three clicks to adjust
the heat setting and five clicks to switch them off. The button heats the chamber as it is held down, so
it is important to keep it pressed while inhaling.
How to Charge The Vape Pen?
Like e-cigarettes, vape pens use a liquid that is heated to become a vapour, and they are powered by
batteries. These batteries can be internal or external. In our case it is internal and rechargeable.
Simply plug your vape pen into your charger via the USB cable, beware that both were designed for
this specific vape pen. Using a charger or cable that was not intended for this vape pen could cause
the battery to overheat or to explode.