CLIPACORE Boss Bedieningshandleiding - Pagina 6
Blader online of download pdf Bedieningshandleiding voor {categorie_naam} CLIPACORE Boss. CLIPACORE Boss 7 pagina's.
Pagina afdrukkenTo avoid damages in transit, the tool is supplied in a sturdy packing. The
packing as well as the tool and its accessories are made of recyclable
materials which enable environmentally friendly and sortwise disposal by
the local reception points.
Only for EU countries
Do not dispose of electric tools together with household waste
material!
In observance of European Directive 2012/19/EC on waste electrical
and electronic equipment and its implementation in accordance
with national law, electric tools that have reached the end of their
life must be collected separately and returned to an environmentally
compatible recycling facility.
Noise Emission
The indication of noise emission is measured after EN 62841-2-1. The level
of acoustic pressure on work site could exceed 85 dB (A); in this case
protection means must be used.
Wear ear protectors!
The typical hand-arm vibration is below 2.5 m/s².
Measured values determined according to EN 62841-2-1. The declared vibration
emission level represents the main applications of the tool. However, if the tool is
used for different applications, with different accessories or poorly maintained, the
vibration emission may differ. This may significantly increase the exposure level
over the total working period. An estimation of the level of exposure to vibration
should also take into account the times when the tool is switched off or when it is
running but not actually doing the job. This may significantly reduce the exposure
level over the total working period. Identify additional safety measures to protect
the operator from the effects of vibration such as: maintain the tool and the
accessories, keep the hands warm, organisation of work patterns.
Dust protection
Dust from material such as paint containing lead, some wood species,
minerals and metal may be harmful. Contact with or inhalation of the dust
may cause allergic reactions and/or respiratory diseases to the operator or
bystanders. Certain kinds of dust are classified as carcinogenic such as oak
and beech dust especially in conjunction with additives for wood
conditioning (chromate, wood preservative). Material containing asbestos
must only be treated by specialists.
• Where the use of a dust extraction device is possible it shall be used.
• To achieve a high level of dust collection, use industrial vacuum cleaner
(category M) for wood and/or minerals together with this tool.
• The work place must be well ventilated.
• The use of a dust mask of filter class P2 is recommended.
Warranty
According to the general supply conditions for business dealings, suppliers
have to provide to companies a warranty period of 12 months for redhibitory
defects. (To be documented by invoice or delivery note).
Damage due to natural wear, overstressing or improper handling are
excluded from this warranty.
Damages due to material defects or production faults shall be eliminated
free of charge by either repair or replacement.
Complaints will be accepted only if the tool was returned in non-dismantled
condition to the manufacturer or an authorised service centre.
Declaration of Conformity
We declare under our sole responsibility that the product described under
"Technical Data" is in conformity with all relevant provisions of the directives
2011/65/EU, 2014/30/EU, 2006/42/EC
including their amendments and complies with the following standards:
EN 62841-1
EN 62841-2-1
EN 55014-1
EN 55014-2
EN 61000-3-2
EN 61000-3-3
Technical file (2006/42/EC) at:
Elektrowerkzeuge GmbH Eibenstock
Auersbergstraße 10
D – 08309 Eibenstock