Doepke Dupline DSM 8 Gebruiksaanwijzing - Pagina 6
Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} Doepke Dupline DSM 8. Doepke Dupline DSM 8 8 pagina's. 8-way relay output
Pagina afdrukken
Doepke
Short circuits between Dupline signal conductors and the 24 V operating voltage or con-
nections to the grounding lead to malfunction and are not allowed. The correct polarity
of operating voltage and Dupline signal conductors has to be ensured.
In order to meet the requirements for protective low voltage, VDE0100, Part 410, should
be observed and put into practice during installation.
When connecting please observe that the maximum torque of the terminals of 0.6 Nm
will not be exceeded.
The patented click-and-lock-mechanism allows an easy removal of the unit from the rail
by pushing the housing upwards until it is released.
10. Indicators
Indicator
Green "BUS OK"
LED
8 red LED „EIN"
11. Technical Data
Dupline
Outputs
Load capacity (per output)
Load capacity (per output)
Incandescent lamps
Fluorescent lamps with el. ballast
Gas discharge lamps
Capacitor for compensation
Energy-saving lamps, conv.
Energy-saving lamps, el. ballast
6
Dupline bus:
Off - bus fault / On - bus OK
All-or-nothing relay 1..8:
Off - Relay open / On - Relay closed
Current input
Input channels None
Output channels 8 control channels (Switching relay outputs 1..8)
Type All-or-nothing relay
Voltage
Voltage
Total load
HV-halogen lamps
Fluorescent lamps
ballast
Description
Min.
12 VAC
100 mA
12 VDC
100 mA
max. 1000 W (70µF), 1250 W (100µF
max. 70 µF (100µF
c
3931182/03/01/D
Typ.
Max.
10 µA
250 VAC
30 VDC
3000 W
2500 W
2400 W
600 W
b
)
1250 W
300 W
16 A
10 A
80 A
b
)