Dog Care PC01 Faq - Pagina 2

Blader online of download pdf Faq voor {categorie_naam} Dog Care PC01. Dog Care PC01 8 pagina's. Smart pet clipper

Pagina afdrukken

d. Email customer support for further assistance.

7. The clipper makes unusual noise.

a. The level of sound from your clipper will vary depending on the power mode selected. To

decrease the noise, use the sliding switch to select Quiet Mode.

b. If the noise is louder than usual, clean and oil the blades. Refer to

how to oil the

c. Do not use the product with a damaged or broken attachment comb nor with teeth missing from

the blades as injury may occur. You will likely notice that the blades are broken when the noise is

abnormal. Replace the blades. Visit dogcare.net to purchase replacement blades.

8. The clipper body overheats.

a. The ambient temperature range for operating and charging should be 14°F to 113°F. Use it

indoors only.

b. The blades may not be adequately lubricated. Oil the blades before, during, and after each use.

Refer to

how to oil the

c. The blades may be clogged. Clean and oil the blades while the clipper is off. Refer to

clean the

blades.

d. Do not use the product with a damaged or broken attachment comb nor with teeth missing from

the blades as injury may occur. Visit dogcare.net to purchase replacement blades.

9. The ceramic cutting blade does not move.

a. Fully charge the clipper.

b. The blades may be clogged. Clean and oil the blades while the clipper is off. Refer to

clean the

blades.

c. Do not use the product with a damaged or broken attachment comb nor with teeth missing from

the blades as injury may occur. Replace the blades. Visit dogcare.net to purchase replacement

blades.

10. The clipper pulls hair or cuts unevenly

a. If your pet's hair is matted, when your blades or attachment comb gets clogged with mats, they

won't be able to cut properly, even if the blades are sharp and the clipper motor has enough

power. We recommend brush out your pet's coat thoroughly and give them a bath before you clip.

When moving your clipper, follow the direction of the hair growth.

b. Make sure your pet's hair is dry. The clipper does not clip wet hair properly.

c. The blades may not be adequately lubricated. Oil the blades before, during, and after each use.

Refer to

how to oil the

d. The blades may be clogged. Clean and oil the blades while the clipper is off. Refer to

clean the

blades.

e. Do not use the product with a damaged or broken attachment comb nor with teeth missing from

the blades as injury may occur. Broken blades are more likely to heat up more quickly. Replace

the blades. Visit dogcare.net to purchase replacement blades.

11. The blades overheat

Due to the high-speed nature of your clipper, it is normal that the blade temperature will increase

moderately during use.

b. The ambient temperature range for operating and charging should be 14°F to 113°F. use it

indoors only.

c. The blades overheat faster if not adequately lubricated. Oil the blades before, during, and after

each use. Refer to

blades.

how to oil the

blades.

how to clean the blades

how to

and