Cygnett Unison i-X5 Gebruikershandleiding - Pagina 7

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Cygnett Unison i-X5. Cygnett Unison i-X5 12 pagina's. Dynamic speaker system

Pagina afdrukken

Features

Rear Panel Features (continued)

8. Volume Control: The volume control allows you to set the output

level of your i-X5 (Note: this function is independent of the iPod

volume level).

9. Vent Port: This port aids in reproduction of very low frequencies by discharging

frequencies below 50Hz.

10. 6.5mm Jack Output: Use the 5 metre speaker cable included to connect the left

and right speakers through the 6.5mm jacks on the back of each speaker.

11. Power Switch: This switch turns the device on and off, The 'ON' position is

marked with a white dot.

12. Power Receptacle: Accepts a detachable 3-circuit line cord in order to power

the device.

13. Voltage-Select Switch: Provides 2 selections, 115VAC and 230VAC, and should be

set to match the "house supply" (receptacle) voltage of the country or location in

which the speaker is used. The 115V setting is correct for the USA, while the 230V

setting is correct for most of the UK, Europe and Australia. This setting must be

correct or damage to the speaker will occur.