Canoga Perkins HS8000 Snelstarthandleiding - Pagina 7

Blader online of download pdf Snelstarthandleiding voor {categorie_naam} Canoga Perkins HS8000. Canoga Perkins HS8000 7 pagina's.

Step 9: Cable Connection

In a typical application, the fiber ports, 1F or 8F, are connected to the optical port of a

100BaseFX Ethernet switch or media converter. Connecting the HS8000 to the network is simple

and straight-forward. Connect the fiber optic cables and UTP cables as depicted below. The

UTP ports are connected to other 10BaseT or 100BaseT ports. Canoga Perkins recommends the

use of Category 5 or better UTP cables for 100Mbps circuits.

Figure 11. Cable connection

This concludes the initial set up of the HS8000. For detailed information on other functions of

the HS8000, consult the user manual or contact Canoga Perkins' Tech Support line at (818) 718-

6300.

Canoga Perkins Corporation, 20600 Prairie Street, Chatsworth, CA 91311-6008

Phone: (818) 718-6300, FAX (818) 718-6312 www.canoga.com

P/N 6943465 Rev A

Page 7 of 7