Dogtra 1600NCP Series Instellingen Handleiding - Pagina 2
Blader online of download pdf Instellingen Handleiding voor {categorie_naam} Dogtra 1600NCP Series. Dogtra 1600NCP Series 6 pagina's. Remote controlled dog training collars
Pagina afdrukken
Code Setting Guide for Your Dogtra Transmitter/Receiver
One-Dog
Once you have received the transmitter sent to you by the Dogtra facility,
you need to code set your unit to control your receiver with the new
transmitter (or transmitter with the new receiver).
The code setting method is as follows:
OR
Together
Together
T&B model
1) Turn the transmitter on by pushing the
ON/OFF Button located on the right side.
Then select the level "0" with the
Intensity Selection Dial (some units may
not have an ON/OFF Button)
2)
Place the red dot on the back of the
transmitter to the red dot on the
receiver/collar. Hold the two red dots
together for about 5 seconds or more.
Release them when the green LED blinks
rapidly on the receiver/collar.
3)
Within 5 seconds after taking the two red
dots apart, hold down the Nick and the
Constant button simultaneously for 3
seconds, or until the rapid green blink
resumes to a slower paced green blink.
The LED indicator light blinks once every
4 seconds after staying on green for
about a second. Now the coding is
complete.
e-collars
.