Dogtra 1900S BLACK EDITION Gebruikershandleiding - Pagina 8

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Dogtra 1900S BLACK EDITION. Dogtra 1900S BLACK EDITION 14 pagina's. 1 mile remote trainer by dogtra remote controlled dog training collars

Pagina afdrukken

7. Charging the Battery

The Dogtra BLACK EDITION uses Lithium-Polymer batteries.

1. Charge the unit before using the unit for the first time.

2. Do not charge the batteries near any flammable

substances.

3. Fully charge the batteries if the unit is to be stored

without use for a period of 3 months or more.

Recharge the unit if :

1. The indicator light on the collar is emitting a red color.

2. If the 3 bar indicator on the transmitter LCD shows just

1 bar.

3. The indicator light on the transmitter or receiver will not

come on. The indicator light on the transmitter or receiver

comes on momentarily, but will not stay on when the

"Constant" button is pushed.

Battery Charging Procedure

NOTE : The unit has a partial charge when it leaves the

Dogtra facility, upon receipt of the collar, be sure to give it

a full 2-hour initial charge before the first use.

1. Attach the charging cables to both the transmitter and

receiver(s), as shown on page 14.

2. Plug the charger into a 120-volt wall outlet or if using

the accessory field charger, plug into a cigarette lighter

only for Lithium-Polymer batteries (use a 230-volt

European charger for Europe.). When properly plugged

in, all indicator lights should glow red. During the

charging process, the unit will shut off. Once the battery

cable is unplugged from the unit after a full charge,

you will need to turn the unit on again before use.

3. The Lithium-Polymer battery is fully charged within

2 hours. The lights will stay red during the charging

process. The red light will change into a steady green light

when the battery is fully charged (when you disconnect

the charger after finishing the charge, you will need to

restart the unit).

4. After charging, cover the battery charging receptacles

with the rubber plugs on the transmitter and receiver/

collar.

NOTE : Only use Dogtra-approved batteries, chargers, and

accessories for your Dogtra e-collars. When a charger is not

in use, disconnect it from the power source.