Dogtra 3502NCP Super-X Handleiding voor code-instelling - Pagina 4

Blader online of download pdf Handleiding voor code-instelling voor {categorie_naam} Dogtra 3502NCP Super-X. Dogtra 3502NCP Super-X 4 pagina's. Remote controlled dog training collars

Pagina afdrukken

Code setting for your Orange Collar/Receiver:

1) Turn the Transmitter on by

2) Set the Nick/Constant Toggle

3) Place the red dot on the back of

4) Within 5 seconds after releasing

Together

light blinks once every 4 seconds after staying on green for

about a second. Now the setting work is completed.

pushing the ON/OFF Switch

located on the right side then

select the level 0 with the

Intensity Selection Dial.

Switch on the front of the

transmitter on the C position.

the transmitter to the red dot on

the Orange collar/receiver. Hold

the two red dots together for

about 5 seconds or more.

Release them when the green

LED blinks fast on the

collar/receiver.

the transmitter and the receiver,

hold the Black button and the

Orange button on the left side of

the transmitter together for 3

seconds, or until the rapid green

blink resumes to a slower paced

green blink. The LED indicator

Code setting for your newly replaced

3502NCP Super-X Black Collar/Receiver for (Two-Dog)

Once you have received the black collar/receiver that was sent

to you by the Dogtra facility, you need to code set your unit to

control the new Black Collar/Receiver with your Transmitter.

The code setting method is the same as the procedure

introduced on the page 2 Code setting for your Black

Collar/Receiver.

Code setting for your newly replaced

3502NCP Super-X Orange Collar/Receiver for (Two-Dog)

Once you have received the orange collar/receiver that was

sent to you by the Dogtra facility, you need to code set your unit

to control the new Orange Collar/Receiver with your

Transmitter.

The code setting method is the same as the procedure

introduced on the page 4 Code setting for your Orange

Collar/Receiver.