Dogtra Edge Gebruikershandleiding - Pagina 15

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Dogtra Edge. Dogtra Edge 19 pagina's. Remote controlled dog training collars
Ook voor Dogtra Edge: Producthandleiding (14 pagina's), Gebruikershandleiding (19 pagina's), Gebruikershandleiding (20 pagina's), Handleiding voor code-instelling (2 pagina's)

To replace the battery in the receiver/collar,

1. Begin with the receiver/collar turned off.

2. Remove the strap and unscrew

corners of the receiver/collar.

the screws.

wire from the battery connector plug.

4. Holding the battery wire of the new battery, plug the wire in to the

battery connector plug.

The battery wires must be inside the battery compartment.

the Phillips

head screws on the four

* Caution - The battery wires must

run neatly along the top left side in

to the battery compartment.

* Caution - Do not detach the wire

by pulling from the battery.

* Caution - The orange rubber

to be waterproof and must be

properly seated in place.