Dogtra YS 200 Gebruikershandleiding - Pagina 6

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Dogtra YS 200. Dogtra YS 200 8 pagina's. No bark collar
Ook voor Dogtra YS 200: Gebruikershandleiding (2 pagina's), Gebruikershandleiding (12 pagina's)

Pagina afdrukken

NOTICE :

When first using the "Yapper Stopper", it is

recommended that you start with the lowest level.

If the dog continues to bark, gradually increase the

intensity level.

CONTACT POINTS

A long set of contact points is included.

The contact points must make good contact with the

skin for the unit to function properly.

IMPORTANT : When screwing in the contact points,

tighten by hand only.

FITTING THE COLLAR

Tighten the collar around the dog's neck so that the

points are in contact with the dog's skin.

If the collar is too loose, the dog will not receive

correction when it barks.

Check the dog's neck daily for possible irritation

caused by the contact points rubbing the skin.

Do not leave the collar on for more than eight hours a

day.

IMPORTANT : Remove any other collars from your

dog when it is wearing the Yapper Stopper.

A metal collar or metal buckle that rubs against the

Yapper Stopper bark sensor may inadvertently activate

the unit.

MAINTENANCE

Periodically wash the "Yapper Stopper" with alcohol

or detergent. Before washing, make sure that the

battery cap is tightened.

Dry thoroughly after washing.