Dogtra YS300 Gebruikershandleiding - Pagina 9
Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Dogtra YS300. Dogtra YS300 12 pagina's. No bark collar
Ook voor Dogtra YS300: Gebruikershandleiding (12 pagina's), Producthandleiding (14 pagina's), Gebruikershandleiding (12 pagina's)
Pagina afdrukken
TO RECHARGE THE BATTERY
TO RECHARGE THE BATTERY
1. Open the Battery Charging Receptacle &
Rubber Plug on the No Bark Collar and connect
the Lithium Polymer Charger to the battery-
charging receptacle as shown in the diagram.
2. Plug the Lithium Polymer Charger into an
electrical power outlet of ordinary household
voltage (110V).
3. Li-Polymer Battery provides a 2-hour rapid
charge.
16
110-Volt Charger
Wall Outlet
TO RECHARGE THE BATTERY
4. When the battery is recharging, the LED will
stay on red. The LED light will become green
when the battery is completely recharged.
(The battery is fully charged with a 2-3 hour
charge.)
Battery life
Charging
On charging
Indicator Light
Stays on red
(LED Window)
Note : Only use the dogtra approved Lithium
Polymer Battery Charger that is designed for
dogtra
YS300, or it could potentially damage
the unit.
Completely recharged.
Stays on green
17