Dogtra Edge RT Gebruikershandleiding - Pagina 12

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Dogtra Edge RT. Dogtra Edge RT 17 pagina's. Remote controlled dog training collars
Ook voor Dogtra Edge RT: Instellingen Handleiding (6 pagina's), Gebruikershandleiding (15 pagina's), Producthandleiding (14 pagina's)

Pagina afdrukken

Do not touch the contact points of the receiver/collar while

code setting the EDGE RT. If you do so, you may receive an

electric stimulation.

Also, do not attempt to code set the device while the receiver/

collar is in contact with dogs, other animals, or people.

4. Within 5 seconds of

separating the transmitter

and receiver/collar, hold

down the top orange/

constant button on the

front of the transmitter

and the Pager button on

the back of the transmitter

at the same time. The code

setting is complete when

the LED indicator resumes

blinking every 4 seconds on

the receiver/collar.

11. How to Attach the Belt Clip on the EDGE RT

To attach the included belt clip to the transmitter, follow

the instructions below.

1. Align the belt clip to the grooves on the back of the

transmitter.

2. With a firm grip, screw on the belt clip using the

provided Philips head screws.

Caution!

Tighten until firmly in place. Be careful not to over

tighten.