Dogtrace DOG GPS X20 Gebruikershandleiding - Pagina 15

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Dogtrace DOG GPS X20. Dogtrace DOG GPS X20 19 pagina's.

8.3 Function FENCE – akustic border

FENCE function warns you when your dog moves beyond the space that you´ve had

specified. The border is adjustable within a radius of 30 m up to max. 2 km away from

the receiver. FENCE function can be activated for more dogs, the settings are stored for

each dog separately. If the dog exceeds the set border, the receiver will emit a beep

signal (long intermittent beep) and on the receiver display for this dog starts flashing

circle under direction indicator. To determine which dog exceeded the set border,

switch between paired transmitters until you find the blinking circle.

When you switch on this function, the receiver must be on good GPS signal:

1. In the main navigation panel select the number of the dog for which you want to

activate the function FENCE.

2. Long press of the button FENCE.

3. Set the distance of an acoustic border using the arrows

4. Press the

button briefly to return to do the main screen.

When you switch on the function, the lettering FENCE appears on the display. In the

top line of the screen the lettering FENCE is displayed, if the function FENCE is activated

for at least one collar, which you have paired with a receiver.

When the receiver starts to emit shorter intermittent beep – transmitter (collar) or

receiver do not have a GPS or RF signal. This can occur if the dog goes for example

inside the building (where there is no GPS signal), away from the RF signal, or when the

accumulator in the transmitter is discharged.

WARNING: For the exact indication of the FENCE function is necessary to have a

receiver on the best GPS signal, otherwise it will not indicate border crossing exactly

(given by GPS accuracy).

Note: To use simultaneously the function FENCE and the tracking, pair one dog at

two positions in the receiver. On one of the positions you then activate the FENCE

and the other use for tracking.

Switching off the function FENCE:

1. Select the required dog number in the main navigation panel, for whom you want to

switch off the function FENCE.

2. Press and hold the button FENCE.

3. Using the arrows

4. Briefly press

to return to the main navigation panel.

Function BEEPER is used mainly by hunters to o distinguish whether the dog is in moti-

on or standing still (drawn game).

Switching ON:

1. Switch on the transmitter (collar) – chapter Switching ON/OFF transmitter on the

page10.

set OFF.