ClockedIn OnTIme Hardware installatiehandleiding - Pagina 6

Blader online of download pdf Hardware installatiehandleiding voor {categorie_naam} ClockedIn OnTIme. ClockedIn OnTIme 13 pagina's.

List of components for a WiFi installation – NOT Supplied

1. Wall fixings

b. Wall plugs

Solid Wall Fixings

2. Cable Trunking

3. LAN / ethernet Cable (if required)

6. Tools Required for Installation

1. Power Drill

3. Screw Driver (posi)

5. Wire cutters

7. Hacksaw

Select desired location for OnTime hardware. This must be within 3 metres of a power supply. The

length of the power supply cable is 3m.

Please note the distance of kiosk from the power supply is dictated by the route of the power cable

rather than 'line of sight.'

The height of the unit is recommended to be between 1.1m and 1.4m from floor level to the bottom of

the kiosk.

Considerations for installation:

1. Height of users

3. Location of power supply

5. Not in Direct Sunlight (at any time of day)

7. Not obstructed by furniture

Installation Guide | April 2021

age 5

Micro

Router

Power Supply

Screws

Washers

Dry lining / Stud wall Fixing

2. Masonry drill bit (7mm)

4. Screw Driver (flat)

6. Electricians screw driver – Small (flat)

2. Disabled users

4. Location of ethernet / LAN port

6. Not in High traffic area for goods carts / trolleys

8. Not obstructed by or in close proximity to doors

1C Uppingham Gate, Ayston road, Uppingham, Rutland, LE15 9NY

0845 4 903 901 | [email protected] | clockedin.uk

ClockedIn