Cymbol G3-IP-2MPVPD-M Beknopte handleiding - Pagina 10

Blader online of download pdf Beknopte handleiding voor {categorie_naam} Cymbol G3-IP-2MPVPD-M. Cymbol G3-IP-2MPVPD-M 13 pagina's. G3 series ir vp dome camera

Pagina afdrukken

Note: Click the

button in the live screen to set the focus to the optimum position.

3.5 Network Camera Setup

This section describes how to configure the network camera, and is intended for product

Administrators, who have unrestricted access to all the Setup tools; and Operators, who have access

to the settings for Basic, Live View, Video & Image, Audio, Event, and System Configuration.

You can configure the network camera by clicking Setup in the top right-hand corner of the Live View

page. Click on this page to access the online help that explains the setup tools

When accessing the Network Camera for the first time,

the "Admin Password" dialog appears. Enter your admin

name and password, set by the administrator.

Note: If the password is lost, the Network Camera must

be reset to the factory default settings.

See "3.6 Resetting to the Factory Default Settings".

3.6 Resetting to the factory default settings

To reset the Network Camera to the original factory settings, go to the Setup>System> Maintenance

web page (described in "3.5.5 System > Maintenance") or use the Reset button (SW1) on the board

of the dome camera, as described below:

• Adjusting Zoom:

Click "–" button to zoom out and click "+" button to zoom in.

The focus is moved slightly after adjusting zoom; adjust the

focus again, as necessary.

• Adjusting Focus:

Click "–" button for far focus and click "+" button to near focus.

Quick Installation Guide