DogWatch R9V Gebruiksaanwijzing - Pagina 3

Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} DogWatch R9V. DogWatch R9V 4 pagina's.

Pagina afdrukken

SETTING THE RECEIVER

Setting the Receiver

Receiver Training Levels Your receiver provides eight training levels that allow you to

customize the training setting to your dog's individual needs: Audible (or Vibration) Only,

customize the training setting to your dog's individual needs: Audible (or Vibration)

Level 1 (extra low), Level 2 (low), Level 3 (low medium), Level 4 (medium), Level 5 (medium

Only, Level 1 (extra low), Level 2 (low), Level 3 (low medium), Level 4 (medium), Level

high), Level 6 (high), and Level 7 (extra high). When the receiver is shipped from the

5 (medium high), Level 6 (high), and Level 7 (extra high). When the receiver is shipped

manufacturer, it is set to Training Level 2 (low).

from the manufacturer, it is set to Training Level 2 (low).

Changing the Receiver Settings If you need to change the Training Level on the receiver,

Changing the Receiver Settings If you need to change the Training Level on the

hold your test light magnet to the marked area on the side of the receiver. Hold the magnet

receiver, hold your test light magnet to the marked area on the side of the receiver.

steady and you will hear a series of beeps that indicate the current training level. The

Hold the magnet steady and you will hear a series of beeps that indicate the current

"Audible (or Vibration) Only" level is one long beep, Level 1 is one short beep, Level 2 is

training level. The "Audible (or Vibration) Only" level is one long beep, Level 1 is one

two short beeps, Level 3 is three short beeps, etc. Vibration receivers will vibrate instead

short beep, Level 2 is two short beeps, Level 3 is three short beeps, etc. Vibration

of beep. The Training Level will continue to advance while the magnet is held in position.

receivers will vibrate. The Training Level will continue to advance while the magnet is

When you reach the desired setting, pull the magnet away from the receiver. The receiver

held in position. When you reach the desired setting, pull the magnet away from the

is now set.

receiver. The receiver is now set.

Using the magnet to set the

training level on the R7 Receiver

Receiver Features

Status Lights

Status Light

•

Start-Up When you first insert the battery into your receiver, the status light will

Start-Up When you first insert the battery into your receiver, the status light will flash

flash red and green. This indicates that the receiver has started properly. Once

red and green. This indicates that the receiver has started properly. Once started, the

started, the status light will continue to flash green once every 40 seconds

status light will continue to flash green once every 40 seconds indicating normal

indicating normal operation. In the event that the light does not flash, check the

operation. In the event that the light does not flash, check the battery to be sure that it

battery to be sure that it has been inserted properly.

has been inserted properly.

•

Training Level Indicator When programming the training level of your receiver, the

status light will flash green in conjunction with audible beeps (or vibrations if you

status light will flash green in conjunction with audible beeps (or vibrations if you have a

have a vibration receiver). The number of flashes will equal the training level you

vibration receiver). The number of flashes will equal the training level you have chosen.

have chosen.

Signal Field Indicator When testing the receiver in the signal field the status light will

•

Signal Field Indicator When testing the receiver in the signal field the status light

flash green when the receiver is in the warning zone and will flash green and red when

will flash green when the receiver is in the warning zone and will flash green and

the receiver is in the correction zone.

red when the receiver is in the correction zone.

Correction Alert (TattleTale™) You will be able to tell if your pet has entered the

•

Correction Alert (TattleTale™) You will be able to tell if your pet has entered the

correction area by looking at the status light. The status light will double flash green

correction area by looking at the status light. The status light will double flash

every 40 seconds for 24-hours after the dog enters the boundary area.

green every 40 seconds for 24-hours after the dog enters the boundary area.

Battery Indicator This feature monitors the voltage level of the battery. When the

•

Battery Indicator This feature monitors the voltage level of the battery. When the

receiver detects that the battery has reached a low voltage level, the status light will

receiver detects that the battery has reached a low voltage level, the status light

change from the normal blinking "green" every 30 seconds to blinking "red" every 10

will change from the normal blinking "green" every 40 seconds to blinking "red"

seconds. This indicates that your battery is close to the end of its useful life and you

every 10 seconds. This indicates that your battery is close to the end of its useful

should change the battery within the next 3-4 days

life and you should change the battery within the next 3-4 days.

AutoMemory™ When the receiver is set to Level 4, 5, or 6, our AutoMemory feature

automatically adjusts the correction level of the receiver if your pet enters the avoidance

automatically raises the correction level of the receiver if your pet enters the avoidance

zone. If the dog does not enter the signal field again in the next 24-hour period, the

receiver defaults to the original setting.

Using the magnet to set the

training level on the R9/R9

Receiver