ASG BLC-8020 Bedienings- en onderhoudshandleiding - Pagina 9
Blader online of download pdf Bedienings- en onderhoudshandleiding voor {categorie_naam} ASG BLC-8020. ASG BLC-8020 10 pagina's. Brushless full auto shut-off
Pagina afdrukken
1.
It is recommended to use the tool under 8 hours a day to not overload it.
2.
According to operating frequency and torque loaded, we suggest adding lubricating oils in clutch every 3-6 months,
and contact ASG for maintenance.
3.
Do not attempt to repair or disassemble this cordless screwdriver without authorization. Always have the device
serviced by ASG in order to have the warranty effective continually.
4.
ASG is not responsible for any poor performance or damage caused by customers own modification of the tool.
5.
Chemicals, Acetone, Benzene, Alcohol, Thinner, Ketone, trichloroethylene, etc shall not be in contact with the surface
of the screwdriver in order to prevent chemical damage.
6.
Please follow instruction carefully and do not drop or shock the screwdriver.
7.
Do not turn the Hi/Lo switch during operation in order to cause system malfunction.
8.
The device will not be able to function again once the OK/NG indicator/signal hasn't turned off.
9.
During operation, if the switch has been changed accidentally the device will enable its self-protecting mode and
power off. Re-start the tool in this instance.
10. ASG cordless screwdriver torque output is generated by clutch mechanism, and it is applicable to ISO 6789.
1. Choose the suitable battery for your application:
A. BLC-8010 tool uses the BB-2020 battery
B. BLC-8020 tool uses the BB-2020 battery
C. BLC-8030 tool uses the BB-2020 battery
2. Choose the charger for your battery:
A. BB-2020 battery uses the BC-1020 charger
3. The use of other than genuine ASG batteries or screwdrivers cannot activate the tool due to the build-
in protection system which enforces no charging without the certified part.
4. Please contact ASG customer service for more information.
Other Cautions
Description of Battery and Charger
8