Doheny's Economical Above Ground Suction Cleaner Handmatig - Pagina 6

Blader online of download pdf Handmatig voor {categorie_naam} Doheny's Economical Above Ground Suction Cleaner. Doheny's Economical Above Ground Suction Cleaner 9 pagina's.

Pagina afdrukken

TROUBLESHOOTING

Due to the individual characteristics of your pool, some adjustment may be required to get the best possible

performance from your pool cleaner. The following tips will help you to optimize the performance from your pool

cleaner. The following tips will help you to optimize the performance of your cleaner.

Problem

Pool cleaner does not move

or moves slowly

Pool cleaner gets stuck at

steps or in a corner

Pool Cleaner moves in a

repetitive, non-randon pattern

Pool cleaner stays in only

one end of the pool

Air bubbles can be seen in the

flow from the return line

Pool cleaner falls on its side

Hose won't fit flow control valve

ROUTINE MAINTENANCE

To maintain the performance of your pool cleaner:

• When removed from the pool, make sure the hose is straight. Never coil the hose as this may cause

distortion which may adversely effect the pool cleaner.

• Remove the pool cleaner (including hose) before chemical treatment. Wait a minimum of 4 hours after super

chlorination (shock treatment) of your pool before re-installing the pool cleaner.

• Clean the filter skimmer basket and pump basket regularly.

• When not in use, keep the cleaner disc flat to aviod risk or warping.

• Periodically inspect your pool cleaner for signs of wear. If necessary, replace any worn parts.

• NOTE: Due to harsh conditions in which your cleaner operates, it's colors may fade and discolor over time.

10411 80th Avenue Pleasant Prairie, WI 53158 | Orders and Customer Care: 1-800-574-7665 | Fax: 1-800-323-5932 | Doheny.com

Solution

• Make sure the main drain is closed

• Check the flow control valve and make sure the flow to pool

cleaner is sufficient

• Check diaphragm for wear or damage

• Backwash filter and empty pump strainer basket

• Fit deflector wheel

• Make sure total hose length is correct

• Adjust return line eyeball fittings to use the water flow to help

guide away from the steps or corner

• Make sure return line fittings are directed downwards

• Check that the hose weight position is correct

• Make sure total hose length is correct

• Check the return line flow and redirect if necessary

• Check the total hose length and add more hose if necessary

• Check that hose weight position is correct

• Check the hose to ensure there are no leaks

• Check the connection of the flow control valve, to make sure

it is under water at all times

• Check the pump basket lid is fitted correctly, is not loose or

cracked and that no o-rings are worn or missing. If necessary,

contact your pool professional for assistance.

• Make sure the outer extension pipe swivels freely

• Fit hose adaptor to flow control valve1