Doherty PLE01 Gebruiksaanwijzing - Pagina 16

Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} Doherty PLE01. Doherty PLE01 20 pagina's. 2 & 3 section plinths

Pagina afdrukken

1. Maintenance

9. MAINTENANCE

The Doherty Plinth has been designed to require very little maintenance, however if

there are any signs of damage, or the plinth is not performing as it should, then please

contact your supplier for further assistance. Only authorised Doherty service or repair

personnel or approved service agents should carry out repairs or service activities.

Failure to do so may result in the manufacturer's warranty becoming void.

If a fault does occur please try the following suggestions before calling your supplier

for assistance, as these may help in diagnosing the fault:

Fault

Plinth does not raise up

or down

Back/Leg sections do

not lower

If none of the above work, unplug from the mains supply and contact your

authorised service dealer or contact Sidhil Ltd. Do not use the plinth until the

problem has been resolved.

Possible Cause

Mains Lead not plugged into

the mains supply

Mains Lead not plugged into

the control box or is only

partially plugged in

Fuse has blown in the mains

plug

Actuator or handset leads are

unplugged or only partially

plugged in

Actuator has reached its

maximum or minimum stroke

Damage to mains cable,

actuator cable or handset cable

An obstacle is not allowing the

backrest / leg rest to move

Release handle not being fully

lifted

Remedy

Check that mains lead is

plugged into the mains supply

and the supply is switched on

Check that mains lead is fully

plugged into the control box

Check the power light is

illuminated on the control box

Check that both leads are fully

plugged into the control box

Try both buttons on the handset

to see if the plinth moves

Turn off at the mains and contact

your local supplier

Check that the couch is free of

obstructions

Pull the release handle until it

reaches its stop