ASG 65260 Gebruikershandleiding - Pagina 11

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} ASG 65260. ASG 65260 13 pagina's. Digital torque and angle wrench

Modes of Operation

ASG, Division of Jergens, Inc.

S. Waterloo Road | Cleveland, OH

15700

TAW Series Digital Torque Wrenches

Torque and Angle Model

User Manual

Set Mode (Cont.)

Set Mode − Just Move:

Just Move allows the user to measure torque after rotation of a pre-defined number of

degrees. Degrees will count once load applied is above 5% of the maximum tool span.

Torque will be captured at the angle defined here.

Step 1: Press

to scroll to Set Mode

Step 2: Press

to select Set Mode

Step 3: Press

Step 4: Press

Step 5: Press

to confirm pre-set number selected

Step 6: Press

Pre-Set Mode

In Pre-Set mode, the operator chooses their preferred 'Pre-Set' for operation from their

pre-configured pre-sets (using Set Mode). For Torque and Angle Mode wrenches, the

user can choose between Torque, Torque and Angle and Just Move pre-sets.

Step 1: Press

to scroll to Pre-Set Mode

Step 2: Press

to enter Pre-Set Mode

Step 3: Press

Step 4: Press

to operate within this pre-set parameter

Step 5: Press

to store the applied torque if required

| Phone: (

| Fax: (

44110-3898

888) 486-6163

to scroll to select Just Move

to scroll to required pre-set number (i.e. 1 to 99)

to set just move pre-set angle and

to select your preferred pre-set number (i.e. 1 to 99)

| Email: [email protected] | Web: www.asg-jergens.com

216) 481-4519

to confirm

Page 11 of 13