Dohle DX309 Gebruiksaanwijzing - Pagina 4

Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} Dohle DX309. Dohle DX309 16 pagina's.

Operating Instructions

DOHLE Hand Welding Extruder ExOn5

Operation:

Never use hand-held welding and extruding machines without air supply.

In case of external air supply ensure that the feed line is of sufficient size.

The pressurised air that is supplied must be free of oil and water.

Overhead work:

When working overhead always wear appropriate safety devices (such as helmet,

savety glasses etc.).

Safety:

Check for correct nominal voltage before connecting the hand-held welding and extruding

machine to the mains voltage.

Mains voltage must be identical to the nominal voltage shown on the type plate of the hand-

held welding and extruding machine.

Pursuant to sec. 55 of VDE 0 100 the hand-held welding and extruding machine must be

operated using a protective switch or an isolation transformer.

Extension cords:

When using extension cords the minimum diameter of cables must be observed.

Length up to 18 m: diameter 2.5 mm²

Length up to 50 m: diameter 4.0 mm²

Extension cords must be approved and marked for their place of utilisation.

Stop operating the hand-held welding and extruding machine if:

connecting line or plug have been damaged

safety installations have been damaged

foreign objects or liquids have entered the hand-held welding and extruding machine

changes occur in the operating state

Never spray water on hand-held welding and extruding machines

(risk of short circuit)

Never use hand-held welding and extruding machines in hazardous or inflammable

areas.

DOHLE Extrusionstechnik GmbH