ASG EasyLine 4G Installatie- en gebruikershandleiding - Pagina 14
Blader online of download pdf Installatie- en gebruikershandleiding voor {categorie_naam} ASG EasyLine 4G. ASG EasyLine 4G 16 pagina's. Miniature phone line (pstn) simulator
Pagina afdrukken
Daily SMS limit: You can define how many SMSes the module can send in a day. This function can be
turned off by setting the value to 255. If you set this limit to 0, the module will not send SMS!
The maximum number of attempts in the event of an SMS sending error can also be set.
Redirection
of
(SMS command: 1234REDIR=1...8)
SMS header, the text of which will appear before the text of every SMS.
Programming with SMS command
You can program the device by sending even 1 SMS. The text of the SMS must always start with the security
code. Commands can be concatenated separated by commas, so you can change several parameters at once.
The length of the SMS command cannot exceed 160 characters.
The list of commands is as follows:
Example of programming with the SMS command:
1234SMSTEL=06301111111,TELBE=06302222222, OUT=003, SMSPIN=1234,
1234ADD=+36301234567*
The EasyLine 4G module has an internal memory, so there is no need to save the phone number on the SIM
card. Save our control phone numbers in the internal memory.
After successful programming, the module sends back an SMS with the following text:
„Stored:1 Error:0 V4.7"
If there was an error in the programming SMS, the device will return the following text:
„Stored:0 Error:1 V4.7"
If you do not want to receive this message, use the NOSMS command or the RECALL command, after which
the module will call to indicate successful programming.
Criteria for commands:
•
cannot contain accented characters
•
all characters of the command are uppercase
•
commands must be separated by a space
•
you can also use # instead of the equals sign.
•
messages must always start with the security code, after which the first command comes immediately
without a space (the second command must be preceded by a space).
•
the SMS text command must always be closed with a * character
Description
editing SMS security code
adjust clock
(basically, it is updated
automatically when
connecting to the mobile
network, but if the network
does not support it, it can be
set. After a network update
or until the next restart, it
keeps the manual settings)
save telephone number for
caller identification
removing telephone number
from caller number
identification list
SMS
received
on
the
SMS
x value
command
CODE
CLOCK
ADD
DEL
EasyLine 4G
module
to
a
given
value after = sign
= new security code
=
yymmddhhmm
yy: year, mm: month
dd: day, hh: hour
mm: minute
= Phone number (with +36)
= Phone number (with +36)
www.ascglobal.eu
number
to
be
notified.
Example
1234CODE=4321
1234CLOCK=2211230731
The date will be:
2022. 11. 23. 07:31
1234ADD=+36305551234
1234DEL=+36305551234
14