CYP CP-293N Bedieningshandleiding - Pagina 8

Blader online of download pdf Bedieningshandleiding voor {categorie_naam} CYP CP-293N. CYP CP-293N 16 pagina's. Pc/hd to hdmi
Ook voor CYP CP-293N: Bedieningshandleiding (16 pagina's)

Pagina afdrukken

6. OPERATION CONTROLS AND FUNCTIONS

6.1 Front Panel

HDMI OUTPUT: Connect to a HDMI equipped display or AV receiver

for video and audio output.

OPTICAL OUTPUT: Connect to an amplifier or active speakers with

an optical cable for LPCM 2 channels digital audio output.

AUDIO OUTPUT: Connect to an amplifier or active speakers with a

3.5mm mini-jack cable for analog audio output.

MENU: Press this button to enter the OSD (On-screen Display) menu

and press it again to make a selection.

Plus (+)/Minus (−): Press these buttons to:

When in the OSD menu

• Navigate up/down the OSD menu.

• To adjust the value of a menu selection.

Under normal operation (outside of OSD menu)

• Press the '-' button to perform automatic calibration of the

output signal when the input signal is from PC (VGA) only.

• Press the '+' button together with the 'MENU' button to switch the

output resolution to XGA@60 (1024×768).

• Press the '-' button together with 'MENU' button to switch the

output resolution to 720p@60.

• Press both the '+' and '-' buttons at the same time to reset the

device to the default settings.