Dok CR32 Gebruikershandleiding - Pagina 18

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Dok CR32. Dok CR32 20 pagina's. Universal multicharging station

Pagina afdrukken

Troubleshooting

Symptom

AC adaptor does not plug into the wall

Unit does not

socket and the other end is not pluged

turn on

into the power supply jack at back of the

unit

CR32 doesn't

CR32 requires a reset

respond

AUX IN sound is

System or your personal device volume

too low

setting is too low

Volume level is set too high

Sound is

distorted

Sound source is distorted

FM band radio is

FM loop antenna isn't located properly

very noisy

Alarm not

(AM)/PM time/alarm time not set correctly

working

Tablet won't

Wrong USB port is pluged in

charge

Possible Problem

Plug the adaptor into a working wall

socket and plug the connector into

the supply jack on the unit

If unit is plugged in and doesn't

respond, try resetting following these

steps:

a) unplug unit from the power source

b) remove back up batteries

c) wait a few minutes, then resume

use

Turn up the unit or your personal

device volume

Decrease the volume

If the smart phone/tablet or other

device sound source is old or of poor

quality, distortion and noise are easily

noticed with high-power speakers.

Try a different audio file from a

trusted source.

Move the FM loop antenna away from

the main unit and rotate it for best

reception

When setting clock or alarm time,

take note of the PM indicators

Only the center red USB port

provides 5V/ 2.1A power for most of

the tablet charging

Solution