CYP CSC-210 Bedieningshandleiding - Pagina 6

Blader online of download pdf Bedieningshandleiding voor {categorie_naam} CYP CSC-210. CYP CSC-210 12 pagina's. Video/pc/hd to uxga scaler

(4). Connecting the hardware

Rear Panel

S-VIDEO

VIDEO

Rear Panel

1 . Composite Video input: Use a composite video cable to connect the composite

2 . S-Video input: Use a S-Video cable to connect the S-Video output of the source

3 . YCbCr/YPbPr input: Use the component cable to connect the component

4 . PC input: Connect the source computer's VGA output signal to the HD 15

connector labeled "PC In" on the back of the Video Scaler.

5 . PC output: Use the HD-15 cable to connect the output to the PC input of your

6 . RS232: 9-pin D-sub connector for connecting to your PC or other control console

for remote control.

7 . DC power jack: 12V 1A DC power input.

INPUT

Cb/Pb

video output of the source equipment to the connector

labeled " Video" on the back of the Video Scaler.

video equipment to the connector labeled " S-Video" on the back

of the Video Scaler.

S-Video provides improved performance over Composite Video

and is recommended over composite.

output of the source video equipment to the connectors

labeled YCbCr/YPbPr on the back of the video scaler.

display monitor.

Cr/Pr

PC IN

RS-232

OUTPUT

RGB

DC 12V