CYP DCT-24 Bedieningshandleiding - Pagina 9

Blader online of download pdf Bedieningshandleiding voor {categorie_naam} CYP DCT-24. CYP DCT-24 16 pagina's. Usb audio center
Ook voor CYP DCT-24: Bedieningshandleiding (16 pagina's), Bedieningshandleiding (16 pagina's)

Pagina afdrukken

6.2 Rear Panel

DC 5V

DC 5V: Connect the 5V DC power supply to the unit and plug the

adaptor into an AC outlet.

RS-232: Connect via the supplied 3.5mm D-sub 9-pin adaptor

cable to a PC/Laptop or RS-232 control system for RS-232 control.

USB: Connect to a PC/Mac source for USB audio.

Connect to a PC with a USB cable for firmware update. Press and

hold down the 'POWER/SOURCE' wheel and then plug the 5V DC

power supply to the unit, the system will enter into firmware update

mode. Run the software on the supplied CD-Rom and follow the

on-screen intructions to install the driver (PC/Windows only).

LINE IN: Connect the L/R IN to an analog stereo source such as a

CD or media player.

LINE OUT: Connect the L/R OUT to amplifier or active speakers with

RCA jack cables.

USB

RS-232

LINE IN

LINE OUT