3M Air-Mate PAPR 520-03-63R01 Gebruiksaanwijzing - Pagina 3
Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} 3M Air-Mate PAPR 520-03-63R01. 3M Air-Mate PAPR 520-03-63R01 17 pagina's. Belt-mounted high efficiency powered air purifying respirator
Ook voor 3M Air-Mate PAPR 520-03-63R01: Handmatig (2 pagina's)
Pagina afdrukken
GENERAL SAFETY INFORMATION
Intended Use
The belt-mounted Air-Mate™ PAPR Assembly consists of a blower unit, a high efficiency filter and a
rechargeable nickel cadmium battery pack. The blower unit draws contaminated air through the high
efficiency filter before it enters the breathing tube in the rear of the headgear. The PAPR unit includes an
on/off switch for safety and convenience. When combined with appropriate 3M breathing tubes and
headpieces, the Air-Mate™ PAPR Assembly 231-01-30 forms a complete NIOSH-approved powered air
purifying respirator (PAPR). These PAPR systems are intended to help provide respiratory protection against
certain airborne particulate contaminants.
List of Warnings and Cautions within these User Instructions
This product helps protect against certain airborne particles. Misuse may result in sickness or death. For
proper use, see supervisor, User Instructions, or call 3M in U.S.A., 1-800-243-4630. In Canada, call
Technical Service at 1-800-267-4414.
Each person using this respirator must read and understand the information in these User Instructions before
use. Use of these respirators by untrained or unqualified persons, or use that is not in accordance with these
User Instructions, may adversely affect respirator performance and result in sickness or death.
Do not use with parts or accessories other than those manufactured by 3M as described in these User
Instructions or on the NIOSH approval label for this respirator. Do not attempt to repair or modify any
component of the system except as described in these User Instructions. Failure to do so may adversely
affect respirator performance and result in sickness or death.
Failure to conduct an inspection and complete all necessary repairs before use may adversely affect
respirator performance and result in sickness or death.
Failure to pass a user performance check and complete all necessary repairs before use may adversely affect
respirator performance and result in sickness or death.
Use of this respirator in atmospheres for which it was not NIOSH certified or designed may result in
sickness or death. Do not wear this respirator where:
Atmospheres contain hazardous vapors or gases
-
Atmospheres are oxygen deficient
-
Contaminant concentrations are unknown
-
Contaminant concentrations are Immediately Dangerous to Life or Heath (IDLH)
-
Contaminant concentrations exceed the assigned protection factor (APF) recommended for the applicable
-
headpiece or the APF mandated by specific government standards, whichever is lower. Refer to the User
instructions provided with the applicable headpiece.
Do not enter a contaminated area until properly donning the respirator system. Do not remove the respirator
before leaving the contaminated area. Doing so may result in sickness or death.
Contaminants that are dangerous to your health include those that you may not be able to see or smell. Leave
the contaminated area immediately if any of the following conditions occur. Failure to do so may result in
sickness or death.
3