CYP CMSI-8H8HS Bedieningshandleiding - Pagina 9
Blader online of download pdf Bedieningshandleiding voor {categorie_naam} CYP CMSI-8H8HS. CYP CMSI-8H8HS 20 pagina's. 8x8 hdmi matrix
Ook voor CYP CMSI-8H8HS: Bedieningshandleiding (16 pagina's), Bedieningshandleiding (16 pagina's)
Pagina afdrukken
6.2 Rear Panel
3
HDMI Out
HDMI In
1
2
3
4
1
CONTROL: This port is the link for Telnet and Web GUI controls,
connect to an active Ethernet link with an RJ45 terminated cable (for
further details, please refer to section 6.7 & 6.8).
Warning: Please do not connect this port directly to the PC/Laptop
as the Telnet function will not work.
2
RS-232: Connect to a PC or control system with D-Sub 9-pin cable
for the transmission of RS-232 commands.
3
IR IN: Connect to the supplied IR extenders for IR signal reception
from the remote control of the Matrix. Ensure that the remote is
within the direct line-of-sight of the IR extender when used.
4
SERVICE: Manufacturer use only.
5
HDMI OUT A~H: Connect to HDMI equipped TVs or monitors for
display of the HDMI input source signal.
6
HDMI IN 1~8: Connect to the HDMI input source devices such as a
DVD player or a Set-top Box with HDMI cable or DVI to HDMI cable..
7
DC 24V: Plug the 24 V DC power supply into the unit and connect
the adaptor to an AC outlet.
A
B
C
HDMI Out
HDMI Out
1
2
3
HDMI In
HDMI In
5
D
E
F
HDMI Out
HDMI Out
HDMI Out
4
5
6
HDMI In
HDMI In
HDMI In
6
G
H
HDMI Out
HDMI Out
GND
GND
V+
V+
V+
V+
3
3
4
4
1
1
2
2
GND
GND
GND
GND
7
8
DC 24V
HDMI In
HDMI In
7
4