Ashcroft E Handleiding voor installatie en onderhoud - Pagina 14
Blader online of download pdf Handleiding voor installatie en onderhoud voor {categorie_naam} Ashcroft E. Ashcroft E 19 pagina's. Bimetal thermometer
Ook voor Ashcroft E: Handleiding voor installatie en onderhoud (12 pagina's)
Pagina afdrukken
With the help of the product coding and our data sheets (see Appendix 12 available on our website) you will receive
the necessary information to be able to carry out a material separation yourself. Our devices described in this manual
are mostly made of stainless steels, which can be recycled. Before disassembling, check if there is a device filled with
silicone oil. This oil must first be drained off and collected in accordance with the safety instructions in the safety data
sheet. Then separate the case ring, which carries the window, from the case using a strap wrench. For device with
crimped housing ring, these can be cut open with a pliers. The sealing ring and flat glass can be removed. Next,
remove the pointer and dial, which are made of aluminium, everything else is made of stainless steel..
Materials to be recycled:
Filling fluid (oil see data sheet)
Stainless steel (case, ring, process connection, stem, bimetallic coil, see data sheet)
Dial and pointer (aluminium)
Window (see data sheet glass or plastic)
Seals (sealing ring of the sight glass, venting device, pressure relief device)
Please help to protect our environment!
Some of the product materials can be reused if you take the product to a collection point or to a waste
management company. By reusing some parts or raw materials from used products, you make an important
contribution to protecting the environment.
Our products are delivered in optimized packaging. This essentially means that materials are used which can be
recycled as secondary raw materials at the local disposal service. For more information on the disposal of packaging,
please contact your local administration.
12 Appendix
12.1 Data sheet Bimetal Thermometer Ax / Ex
Detailed data sheets are available directly from the manufacturer (see 1.6Manufacturer address, customer service).
Model
AI, AE, AM, A3B,
EI, EE, EM, E3B
ART, ERT
Designation
Stainless steel bimetal thermometer
Model A according to EN 13190
Stainless steel bimetal thermometer
Model E according to ASME B40.200
Stainless steel bimetal thermometer
with stepped stem Model ART and ERT
page 14 of 19
Document
DS BIM AxEx
DS BIM AxEx
DS BIM-RT