Ashcroft GC30 Handleiding voor installatie- en onderhoudsinstructies - Pagina 12
Blader online of download pdf Handleiding voor installatie- en onderhoudsinstructies voor {categorie_naam} Ashcroft GC30. Ashcroft GC30 20 pagina's. Ultra-compact digital
differential pressure transducer
Ook voor Ashcroft GC30: Snelstarthandleiding (7 pagina's)
Pagina afdrukken
Measurement Mode
MODE
Press > 3 sec.
Press > 3 sec.
Function Setting Mode
(Comparator
operation selection)
MODE
(Display selection)
MODE
(In SI unit
selection)
(Only in
(Scaling of LED display)
Decimal point position
MODE
(Scaling of LED display) Indicated
value at min. pressure range
MODE
(Scaling of LED display) Indicated
value at max. pressure range
MODE
(Filter selection)
MODE
(Only in output option selection)
(Analog output scaling) Pressure when
the analog output is at zero point
MODE
(Analog output scaling) Pressure when
the analog output is at span point
MODE
Caution: Editing the setting value in function setting mode resets all of the setting values
including the switch. Please note that when the reset setting values are out of the display
range, they will be adjusted to an upper or lower limit value that can be processed internally.
9A. SwITCh OPerATION
Select "Switch Operation Selection" with the MODE key. The message
for 1 sec. and then the current setting is displayed. Select either hysteresis or switch operation
display with the
9b. DISPlAY SeleCTION
Select "Display Selection" with the MODE key. The message displayed for 1 sec. and then
the current setting is displayed. Select pressure display by PSI or display scaling (Arbitrary
units defined by user) with the keys.
MODE
After 1 second
(nP
Message displayed
After 1 second
un;
Message displayed
ETC
display function selection)
After 1 second
d-P
Message displayed
After 1 second
d-l
Message displayed
After 1 second
d-k
Message displayed
After 1 second
f;l
Message displayed
After 1 second
A-l
Message displayed
After 1 second
a-k
Message displayed
keys.
Select with
X W
keys
kY5
kY5
Current setting
Hysteresis
Select with
X W
keys
+pa
npa
Current unit
Pressure indication by a SI unit
setpoint
Set any desired position within the
. 0 03
0 to 3 range with the
Set any desired position within the
. 0 00
–1999 to 1999 range with the
Set any desired position within the
1. 0 00
–1999 to 1999 range with the
Select with
f-1
Current setting
Set any desired position within the
0. 0
–100 to 150% range with the
Set any desired position within the
100. 0
–100 to 150% range with the
12
!;n
Hys or
Win
Window comparator
npa
kPa
MPa or
et(
etc.
Indication scaling displayed
X W
keys
1. 8 . 8 . 8
3
2
1
0
X W
X W
X W
keys
f-0
Filter off
f-1
Time constant 25ms
f-2
Time constant 250ms
f-3
Time constant 2.5s
f-4
Time constant 5s
f-5
Time constant 10s
X W
X W
np is displayed
k2O
iw
keys
keys
keys
keys