Ashcroft S5500 Handleiding voor installatie en onderhoud - Pagina 3

Blader online of download pdf Handleiding voor installatie en onderhoud voor {categorie_naam} Ashcroft S5500. Ashcroft S5500 8 pagina's. All stainless steel gas actuated thermometer
Ook voor Ashcroft S5500: Handleiding voor installatie en onderhoud (8 pagina's)

Pagina afdrukken

1 General remarks

1.1 Purpose of this Manual
This Operating Manual contains fundamental and essential advice to be followed for the installation,
operation and servicing of the device. It must be read without fail before assembly and start-up of the device
by the fitter, the operator and the specialist personnel responsible for the device. This Operating Manual
must be available at the point of use of the device at all times.
The following sections about general Safety information (2) and also the following specific advice regarding the
intended purposes (2.2) and through to disposal (10.3) contain important safety information which, if not followed, may
result in risks for people and animals, or to property and buildings.
1.2 Symbols
Warning!
This indicates a possibly hazardous situation where failing to follow advice may result in risks to people,
animals, the environment and buildings.
Information!
This emphasizes key information for efficient, fault-free operation.
1.3 Limits of liability
Failure to respect this safety information, the envisaged uses or the limit values relating to use indicated in the
technical data for the device may result in risk or to injury to people, the environment or the plant.
Claims for compensation for damage against the device supplier are excluded in such an eventuality.
1.4 Copyright
This Operating Manual may only be copied and passed on as a complete document without the special permission of
the publisher.
1.5 Warranty
For the product described here, we offer a warranty pursuant to Section 6 Guarantee in Respect of Defects in our
General Terms and Conditions of Delivery and Payment.
1.6 Manufacturer's address, customer services
Ashcroft Instruments GmbH
Max-Planck-Strasse 1
D-52499 Baesweiler. Germany
2 Safety
2.1 General sources of hazards
Temperature gauges are generally a constituent part of a control and measurement system, and their failure can result
in hazardous situations. The selection of temperature gauge should be made in accordance with the rules set out in
EN 13190 or ASME
B40.200.
2.2 Use in accordance with intended purpose
The devices are only to be used for the intended purpose as described by the manufacturer.
The devices are used for direct display of temperatures.
For each use scenario, the corresponding set-up regulations must be respected. The use in explosion risk areas is not
permitted.
2.3 Operator's responsibility
Safety instructions for proper operation of the device must be respected. They are to be provided by the operator for
use by the respective personnel for installation, servicing, inspection and operation. Risks from electrical energy and
from the released energy of the medium, from escaping media and from improper connection of the device must be
eliminated. The details for this are to be found in the corresponding applicable set of regulations, such as DIN EN,
Tel.:
+49 (0) 2401/808-888
Fax.:
+49 (0) 2401/808-999
Web:
www.ashcroft.eu
Page 3 of 8